Инструкция на принтер brother hl

Step Cause Remedy Main PCB failure Replace the main PCB ASSY. Page 79 Error code 8A00 Jam Tray 1 The registration front sensor does not detect paper pass within the specified time after the T1 paper feed sensor detected paper pass. Step Cause Remedy Main PCB failure Replace the main PCB ASSY. Page 91 Error code EF00 Print Unable EF The supplied power is unstable. • Turn OFF the power switch. Step Cause Remedy Main PCB failure Replace the main PCB ASSY. Page 87 Error codes CA00 to DC00 These errors do not usually occur during normal use.

Leave the machine for a while to remove condensation. — Select «Improve Toner Fixing» in the driver. — When the white spots appear at intervals of 45.3 mm, replace the toner cartridge with a new one. The related models are listed at the bottom of the page. Then Next. 2). Select Add a printer using a TCP/IP address or hostname.
Page 80 Error code 8C00 Jam MP Tray The registration front sensor does not detect paper pass within the specified time after the paper was picked up from the MP tray. • Remove the paper jammed in the MP tray. Check the Query the printer and automatically select the driver to use option. Step Cause Remedy… Page 78 Error codes 8600 and 8700 These errors do not usually occur during normal use. Step Cause Remedy Low-voltage power supply PCB Replace the low-voltage power supply PCB failure ASSY, and then reset the irregular power… Page 92 Error code F900 Machine Error F9 The country code was not entered correctly. Error code 6B00 Fuser Error / Print Unable 6B The center thermistor of the fuser unit has not reached the specified temperature within the specified time. Page 99: Poor Fixing Poor fixing — Check the usage environment of the machine.

Похожие записи: